Details
Tucked into the moss at the back of the enclosure, a small burlap-style sack sits slumped on the substrate, its neck cinched with a tied cord and a little fir tree patch stitched to the front. Look closer and the front opening becomes a cozy retreat, a dark pocket where a gecko, frog, or tarantula can tuck away out of sight. This Christmas gift sack hide gives your terrarium or vivarium a working shelter with a festive story built right in.
📖 Full Product Description
This is a 3D printed terrarium hide shaped like a rustic fabric gift sack. The surface is sculpted to resemble coarse woven linen, with a tied cord wrapped around the gathered neck and a sewn-on style appliqué showing a fir tree on the front. It is designed by novYTerra and printed and sold by CurioPrinta under commercial license.
Function comes first: a front opening leads into the hollow interior, creating a single-entrance hide for small animals to shelter, rest, or sleep in. The sack has a sturdy, freestanding shape that sits securely on the enclosure floor, so it works as a stand-alone hide or nestled between plants, cork, and leaf litter. Partially burying the base in substrate or tucking moss around it helps it blend into a naturalistic or bioactive layout, while the holiday details make it a fun seasonal swap for a planted display.
The hide is offered in two versions. For a misted, planted, or bioactive setup, the PETG Wet Model suits humidity-loving residents such as dart frogs and mourning geckos, along with invertebrates like tropical isopods. For a drier build, the PLA Dry Model suits arid enclosures housing invertebrates such as many tarantulas, desert scorpions, and jumping spiders. This is a compact piece, so please compare the front opening and interior space against the adult size and behavior of your specific animals before use.
You receive one Gift Sack Hide, printed unpainted in a single solid filament color. Because the cord and fir tree patch are sculpted into the print, they appear in the same color as the rest of the sack. Plants, substrate, animals, and the enclosure itself are not included.
✔️ Key Features
✔ Festive gift sack design by novYTerra, printed and sold by CurioPrinta under commercial license
✔ Integrated hide with a front opening into a hollow interior
✔ Sculpted coarse-linen texture with a tied cord and fir tree appliqué detail
✔ Sturdy freestanding shape that sits securely on the enclosure floor
✔ PETG Wet Model for high-humidity, misted, bioactive, or high-UV terrariums, always shipped unpainted
✔ PLA Dry Model for arid terrariums, dioramas, holiday tabletop decor, and dry display
✔ Compact single size, printed as one solid piece
✔ Made to order
🧱 Material Options
This hide is offered in two versions so you can match it to your enclosure’s humidity:
PETG Wet Model
Choose this version for high-humidity, misted, bioactive, and planted terrariums or vivariums, including setups with damp substrate and enclosures under high-output UV lighting. It is printed in PETG and supplied completely unpainted. CurioPrinta uses PETG for wet and UV-lit setups rather than standard PLA because PETG handles prolonged moisture and UV exposure better than PLA. That is a material choice, not a guarantee: continuous high-output UV can still gradually embrittle PETG over time, and PETG is not permanently waterproof, indestructible, chemically inert, or universally suitable for every animal or habitat.
PLA Dry Model
Choose this version for arid terrariums, dioramas, shelf display, and holiday or general home decor. PLA versions are not recommended for submerged aquarium use, constantly wet or heavily misted enclosures, or setups with strong UV lighting. Pick PLA only when the hide will stay dry and out of intense UV.
This piece is designed and listed for terrarium and vivarium use, not as aquarium decor.
🔧 Setup, Use & Care
For terrarium & vivarium use
💧 Rinse the hide with clean water before adding it to your enclosure, and avoid soaps, detergents, and household cleaners.
🌡️ Verify the material and design suit your habitat’s temperature, humidity, lighting, and species: PETG Wet Model for misted or bioactive builds, PLA Dry Model for arid ones.
🔥 Keep it away from direct contact with high-output heat lamps, heating elements, and other intense heat sources.
🧱 Set it on a firm, level spot or bed the base into substrate so it cannot tip or shift.
🦎 Check the front opening and interior against your animal’s adult size.
🧹 Inspect regularly for wear, damage, trapped waste, or areas that are hard to clean, and remove it if it becomes damaged.
📘 Let qualified, species-specific husbandry guidance take priority over general product suggestions.
Cleaning
For the PETG Wet Model, rinse with clean water and use a soft brush to reach into the opening when needed. Avoid soaps, bleach, solvents, abrasive cleaners, boiling water, dishwashers, and high-temperature cleaning, and allow it to dry completely before long-term storage. For the PLA Dry Model, dust with a soft brush or cloth, use a lightly damp cloth when appropriate, and keep it away from intense heat.
📐 Dimensions
Approximate Dimensions:
Length: 3.6" (91 mm)
Width: 3.3" (84 mm)
Height: 3.9" (98 mm)
Because each item is individually 3D printed, minor dimensional variation may occur.
🎨 Color and Appearance
The hide is printed in a single solid-color filament and is not painted, so the sack, cord, and fir tree patch all share one color. Some listing photos show the hide painted (for example, a colored cord and tree); those are finishing examples only, and your hide ships unpainted.
Colors may look slightly different in person because of lighting, photography, monitor settings, and filament batches, and the hide can look different under enclosure lighting or when damp. A natural or festive look comes from choosing an appropriate filament color rather than applied paint, and an exact color match is not promised.
🖨️ About 3D Printing
This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations are normal characteristics of the process. These details are not considered defects and make each piece slightly unique. Support-contact marks may appear inside the opening or in other recessed areas, and minor cosmetic differences can occur between prints because each hide is individually produced rather than injection molded.
🛠️ Made to Order
Each hide is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time. The hide ships as a single printed piece with no assembly needed.
⚠️ Safety and Compatibility
This product is decorative habitat decor, not a toy. You are responsible for deciding whether the size, material, opening, surfaces, and placement are appropriate for your specific animals and habitat. Animals should not be allowed to chew or ingest the material, and the item should be removed if it becomes damaged, as small parts or broken pieces may present a hazard. CurioPrinta cannot account for every species, animal behavior, enclosure design, temperature, humidity, or maintenance routine, so please confirm suitability for your own setup before use.
CurioPrinta does not describe this product as "reptile safe," "non-toxic," or guaranteed for any specific animal. Naming a species anywhere in this listing is for search relevance and design context, not a compatibility or safety claim.
📦 What Is Not Included
You receive one Gift Sack Hide in the material and color you select, printed unpainted. Everything else shown in the product photos is not included, for example:
🌿 Plants, moss, leaf litter, and substrate
🪵 Cork, wood, rocks, and other hardscape or holiday props
🦎 Animals
💡 Lighting, and the terrarium or vivarium enclosure
Note: some photos show the hide painted as a finishing example. The product ships unpainted.
❓ FAQ
💧 Can this be placed underwater?
This hide is designed and listed for terrariums and vivariums, not aquariums. For damp, misted, or bioactive enclosures, choose the PETG Wet Model, which handles moisture better than standard PLA. The PLA Dry Model should stay dry.
🎨 Is the Wet Model painted?
No. The PETG Wet Model ships completely unpainted in a solid filament color. Any painted images are finishing examples only.
🧱 Can I order this in PLA?
Yes, as the PLA Dry Model for arid terrariums, dioramas, holiday tabletop decor, and dry display. PLA is not recommended for submerged use, constantly wet enclosures, or strong UV lighting.
☀️ Which version should I pick for a UV-lit or misted setup?
Choose the PETG Wet Model. PETG holds up to humidity and high-output UV better than PLA. It is not immune, since continuous UV can gradually embrittle plastic over time, but it is the more durable choice for brightly lit or misted enclosures.
🖌️ Can I paint it myself?
You can, but for anything in an animal habitat you must independently research and confirm that any paint or coating is suitable for your intended species and conditions. CurioPrinta ships the hide unpainted and does not recommend customer-applied paint for wet or submerged use.
🧹 How should I clean it?
Rinse the PETG Wet Model with clean water and use a soft brush if needed. Avoid soaps, bleach, solvents, abrasives, boiling water, and dishwashers. Dust the PLA Dry Model with a soft brush or a lightly damp cloth.
📷 Will it look exactly like the photographs?
It will be very close, but small differences in texture, layer lines, and color are normal for made-to-order 3D prints. Painted photos are examples only, so your hide will be a single solid color.
🦎 Is it suitable for my specific reptile, amphibian, or invertebrate?
That depends on your animal and setup. This is a compact hide (about 3.6" × 3.3" × 3.9"), so compare the opening and interior against your animal’s adult size and follow qualified husbandry guidance. CurioPrinta cannot guarantee compatibility with any specific animal.
Designed by novYTerra