Ghost Bowl 3D Printed Halloween Candy Dish, Cute Spooky Ghost Decor, Trick or Treat Bowl, Fall Table Centerpiece

A classic sheet ghost caught mid float, with a wavy hem that ripples out and wraps around a wide open bowl. The face is all surprise, wide eyes and an open mouth, like it just got startled by the doorbell. Fill it with candy on the porch table in October, or let it sit on a shelf year round holding keys, rings, and pocket change. It is a lot of storage for something that is supposed to be see through.

📖 Full Product Description

The sculpt takes the familiar draped ghost silhouette and turns the lower half into a genuinely deep, usable basin. The hem flows in soft waves around the rim, so the sheet reads as if it is settling over the bowl rather than sitting next to it, and the surprised face on the front gives the whole piece its character. It is friendly rather than frightening, which makes it easy to keep out around kids and guests.
Halloween is the obvious season for it. Set it by the front door for trick or treaters, use it as a candy or snack bowl on a party table, or work it into a fall tablescape with mini pumpkins and dried leaves. Outside of October it settles in fine as an everyday catchall: keys and sunglasses by the door, jewelry on a dresser, dice on a game table, or pens and paper clips on a desk. The smaller sizes suit a nightstand or shelf, while the larger ones have the volume to sit out all evening on Halloween night without needing a refill every ten minutes.
Four sizes are offered, and even the smallest is a full sized bowl rather than a trinket dish. Each one is printed in a single solid filament color and ships unpainted. The simple, graphic shape does most of the work on its own, and a bright white reads as the classic sheet ghost while a dark color turns the same sculpt sharper and more graphic on a shelf.
This piece is offered as dry decor. It is not made or sold as aquarium decor, terrarium decor, or animal habitat equipment, and it is not a food service dish. Wrapped candy is what it is built for. Loose or unwrapped food, hot food, and liquids are not.

✔️ Key Features
✔ Original Ghost Bowl design by novYTerra, printed and sold by CurioPrinta under commercial license
✔ Classic draped ghost silhouette with a wide, deep bowl built into the body
✔ Wavy sheet hem that flows around the rim, so the drape wraps the bowl instead of framing it
✔ Surprised ghost face on the front, playful rather than scary
✔ Four sizes, all with real capacity, up to a large trick or treat bowl
✔ PLA Dry Model, made for dry decorative display
✔ Ships unpainted in a single solid filament color, ready to display or prime and paint
✔ Made to order

🧱 Material Options
This piece is offered in one version only.
PLA Dry Model
The Ghost Bowl is printed in PLA and supplied completely unpainted. PLA is intended for dry decorative use: shelf display, home and seasonal decor, party and table decor, desk use, and general home decor. Keep it out of standing water, constant moisture, and direct high heat.
PLA versions are not recommended for submerged aquarium use.
No wet model offered for this piece
CurioPrinta prints an unpainted PETG Wet Model for decor meant for aquariums, misted or high-humidity enclosures, and high-UV setups, because PETG handles prolonged moisture and UV far better than standard PLA. The Ghost Bowl is not offered in that version. Treat it as a dry decorative object, not habitat equipment.

🔧 Use & Care
Everyday display
💡 Place it on a stable, level surface where it will not be knocked off an edge.
🔥 Keep it away from lit candles, tealights, open flame, heat vents, radiators, and hot appliances. PLA softens with heat.
🔆 Avoid long stretches in direct sun or a closed hot car, both of which can warp or discolor PLA over time.
💧 Keep it out of standing water and constantly damp spots such as a bathroom counter or a wet sink edge.
🍃 If you use it outdoors on a porch on Halloween night, bring it back inside afterward rather than leaving it out in the weather.
Using it for candy
🍬 Wrapped candy only. This is a decorative bowl, not a food service dish, and it is not sold as food safe.
🚫 No hot food, no liquids, and nothing that needs to be washed at high temperature afterward.
✨ Wipe the interior with a dry or lightly damp cloth before you fill it, and again after the season.
Cleaning
🧹 Dust with a soft brush or a dry cloth. A soft toothbrush works well along the hem waves and around the face.
💦 Use a lightly damp cloth with plain water when needed, then let it dry fully.
⛔ Avoid bleach, solvents, abrasive cleaners, boiling water, dishwashers, and any high-temperature cleaning.

📐 Dimensions

Approximate dimensions (Length × Width × Height), imperial first with metric in parentheses:
Small (S1) 5.1" × 5.0" × 2.7" (130 × 128 × 69 mm)
Medium (S2) 6.3" × 6.2" × 3.3" (160 × 158 × 85 mm)
Large (S3) 7.5" × 7.4" × 4.0" (190 × 187 × 101 mm)
XL 9.4" × 9.3" × 5.0" (240 × 237 × 128 mm)
Because each item is individually 3D printed, minor dimensional variation may occur.

🎨 Color and Appearance
Each bowl is printed in a single solid filament color and ships unpainted, with no paint, sealant, or coating applied. Color may look slightly different in person than it does on screen because of lighting, photography, monitor settings, and normal filament batch variation, so an exact match to the photos is not promised.
A bright white print is the classic look here, the storybook sheet ghost that reads instantly from across a room. A dark print flips the same sculpt into something sharper and more graphic, and it shows the hem waves and the face in strong shadow. If you would rather finish it yourself, the unpainted surface takes primer and acrylics well.

🖨️ About 3D Printing
This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations between prints are normal characteristics of the process. They are not considered defects, and they make each piece slightly unique.
Support contact marks may appear in recessed or hidden areas such as the underside and beneath the curves of the hem. Every bowl is produced individually rather than injection molded, so no two are perfectly identical.

📦 Made to Order
Each Ghost Bowl is printed to order in the size you select. These are large prints, and the bigger sizes take a long time on the printer, so order with a little runway ahead of Halloween. Small differences between prints are normal and expected, and production time is separate from shipping time, so the total wait is print time plus transit.

⚠️ Safety Notes
This is a decorative object, not a toy. It is not intended for children to play with, and it is not intended for use inside animal enclosures. Keep it out of reach of pets and small children, who may chew, bite, or knock it over. The material should not be chewed or swallowed.
PLA is heat sensitive, so keep the bowl away from flames, candles, and other heat sources, including the tealights and jack-o-lanterns that tend to end up on the same table. If a piece becomes cracked, chipped, or develops a sharp edge, retire it from use, and keep any broken fragments away from children and animals, since small parts can be a hazard. CurioPrinta cannot account for every room, surface, temperature, or way a piece might be used, so the decision to use it in a given spot is yours.

🚫 What Is Not Included
You receive one Ghost Bowl in the size you select, printed unpainted in a single solid color. Candy, sweets, snacks, keys, jewelry, pumpkins, dried botanicals, candles, furniture, and any other styling props shown in the photographs are not included. Some photos may show a painted example to illustrate finishing ideas. The item ships unpainted.

❓ Frequently Asked Questions
📏 Which size should I pick?
Small works as a desk or dresser catchall and an everyday candy dish. Medium suits an entry table. Large is a solid party table centerpiece. XL is the one to pick if you are handing out candy on Halloween night and do not want to keep refilling it.
🍬 Can I put candy in it?
Wrapped candy, yes, and that is the main use. It is not sold as a food safe or food service dish, so skip loose or unwrapped food, hot food, and liquids.
💧 Can this be placed underwater?
No. This piece is printed in PLA, and PLA versions are not recommended for submerged aquarium use. It is not offered in an unpainted PETG Wet Model, which is what CurioPrinta uses for submerged and high-humidity decor.
🎨 Is it painted?
No. Every Ghost Bowl ships unpainted in a single solid filament color, with no paint, sealant, or coating applied.
🧱 Can I order this in PETG instead of PLA?
This design is currently offered in PLA only, for dry decorative use. Message the shop before ordering if you have a specific need and we can tell you whether it is something we can do.
🖌️ Can I paint it myself?
Yes, the bare print takes primer and acrylics well, and a light wash brings out the hem waves and the face. If you ever plan to use a painted piece around an animal or anywhere near food, research and confirm any coating yourself for that specific use, since we cannot verify products we did not apply.
💦 How should I clean it?
Dust with a soft brush or dry cloth, and use a lightly damp cloth with plain water when it needs more. Avoid bleach, solvents, abrasives, boiling water, and the dishwasher.
📷 Will it look exactly like the photographs?
It will match the sculpt, but color can shift with lighting, photography, monitor settings, and filament batch, and layer lines and texture vary slightly from print to print. An exact match is not promised.

Designed by novYTerra