Details
Picture a weathered stone pinnacle rising out of the substrate, its stepped ledges climbing toward the light and dark caves tucked into its base. This rock tower terrarium piece gives your enclosure a true centerpiece: vertical climbing terrain, sheltered hideaways, and high platforms for resting or basking, all in one naturalistic formation. Set it in a planted bioactive build or a sun-baked arid scape and it reads like a rock that has always been there.
π Full Product Description
This is a freestanding 3D printed rock tower designed by novYTerra for terrariums, vivariums, and paludariums. The surface is sculpted with a realistic stone texture, and the tower rises in a series of stepped levels rather than a single smooth column, so it looks like a natural outcrop shaped by erosion. Caves are built into the structure as integrated retreats, and the upper platforms give animals elevated spots to rest, bask, or keep watch over the enclosure.
Because it stands on its own, the tower works as a central focal point in the middle of a layout or as a vertical anchor in a corner or against a background panel. The stepped construction gives climbing animals a natural route from the floor to the top, and the ledges can hold a little moss or trailing plants in a planted build. Partially burying the base in substrate helps it settle into the scape and look grounded.
The tower is offered in two versions so it fits your humidity level. The PETG Wet Model is for high-humidity, misted, bioactive, and paludarium setups, where keepers commonly house crested geckos, gargoyle geckos, and dart frogs, along with invertebrates such as tropical isopods. The PLA Dry Model is for arid terrariums and dry display, where keepers house animals such as leopard geckos, along with invertebrates like tarantulas and scorpions. Always compare the caves, ledges, and overall dimensions against the adult size and behavior of your specific animals before use.
You receive one rock tower in the size you select, printed unpainted in a single solid filament color. Every size ships as a single piece. Plants, substrate, animals, lighting, and the enclosure are not included. This piece is intended for terrarium, vivarium, paludarium, and dry display use and is not offered for fully submerged aquarium use.
βοΈ Key Features
β Rock tower design by novYTerra, printed and sold by CurioPrinta under commercial license
β Multi-level stepped structure that gives climbing animals a natural route to the top
β Integrated caves built into the formation as sheltered retreats
β Elevated upper platforms for resting, basking, or lookout spots
β Realistic stone texture that blends into naturalistic and bioactive layouts
β Freestanding: use it as a centerpiece, a corner anchor, or alongside a background
β PETG Wet Model for high-humidity, misted, bioactive, paludarium, and high-UV setups, always shipped unpainted
β PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display
β Four sizes, every size ships as a single piece
β Made to order
π§± Material Options
The rock tower is offered in two versions across all four sizes:
PETG Wet Model
Choose this version for high-humidity, misted, bioactive, and paludarium setups, including land areas that see splashing or partial water contact, and for enclosures under high-output UV lighting. It is printed in PETG and supplied completely unpainted. CurioPrinta uses PETG for these setups rather than standard PLA because PETG handles prolonged moisture and UV exposure better than PLA. That is a material choice, not a guarantee: continuous high-output UV can still gradually embrittle PETG over time, and PETG is not permanently waterproof, indestructible, chemically inert, or universally suitable for every animal or habitat. This piece is not offered for fully submerged aquarium use.
PLA Dry Model
Choose this version for arid terrariums, dioramas, tabletop terrain, shelf display, and general home decor. PLA versions are not recommended for submerged use, constantly wet or heavily misted enclosures, or setups with strong UV lighting. PLA also softens at lower temperatures than PETG, so keep it well away from basking lamps and other heat sources. Pick PLA only when the tower will stay dry, cool, and out of intense UV.
π§ Setup, Use & Care
For terrarium, vivarium & paludarium use
π‘οΈ Match the version to your habitat: PETG Wet Model for humid, misted, bioactive, or paludarium builds; PLA Dry Model for arid builds and dry display.
π§ Rinse the tower with clean water before placing it in an enclosure, and skip soaps, detergents, and household cleaners.
π Inspect the item before use and check the caves, ledges, and platforms against your animalβs adult size.
π₯ Do not place it in direct contact with high-output heat lamps, heating elements, or other intense heat sources. If you use a platform as a basking spot, keep the lamp at a safe distance and monitor surface temperatures.
π§± Set it on a stable, level base (a partly buried footprint helps) so it cannot tip, shift, or trap an animal underneath.
π§Ή Inspect regularly for wear, damage, trapped waste, or areas that are hard to clean, and remove it if it becomes damaged or develops sharp areas.
π Let qualified, species-specific husbandry guidance take priority over general product suggestions.
Cleaning
For the PETG Wet Model, rinse with clean water and use a soft brush when needed. Avoid soaps, bleach, solvents, abrasive cleaners, boiling water, dishwashers, and high-temperature cleaning, and let it dry completely before long-term storage. For the PLA Dry Model, dust with a soft brush or cloth, use a lightly damp cloth when appropriate, and keep it away from intense heat.
π Dimensions
Approximate dimensions (Length Γ Width Γ Height), imperial first with metric in parentheses:
Small (S1) 5.1" Γ 5.2" Γ 4.7" (129 Γ 131 Γ 120 mm)
Medium (S2) 5.9" Γ 6.0" Γ 5.5" (151 Γ 153 Γ 140 mm)
Large (S3) 6.8" Γ 6.9" Γ 6.3" (173 Γ 174 Γ 160 mm)
XL 7.6" Γ 7.7" Γ 7.1" (194 Γ 196 Γ 180 mm)
Because each item is individually 3D printed, minor dimensional variation may occur.
π¨ Color and Appearance
Both versions are printed in a solid-color filament and are not painted. Choose a filament tone that reads as natural stone for your layout; natural-looking variation comes from the filament color you select rather than from applied paint. Some listing photos may show the tower painted; those are finishing examples only, and your tower ships unpainted.
Colors may look slightly different in person because of lighting, photography, monitor settings, and filament batches, and the tower can look different under enclosure lighting or when wet. An exact color match is not promised.
π¨οΈ About 3D Printing
This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations are normal characteristics of the process. These details are not considered defects and make each piece slightly unique. Support-contact marks may appear inside the caves or under the ledges, and minor cosmetic differences can occur between prints because each tower is individually produced rather than injection molded.
π οΈ Made to Order
Each rock tower is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time. Every size, including the XL, ships as a single printed piece with no assembly needed.
β οΈ Safety and Compatibility
This product is decorative habitat decor, not a toy. You are responsible for deciding whether the size, material, caves, surfaces, and placement are appropriate for your specific animals and habitat. Animals should not be allowed to chew or ingest the material, and the item should be removed if it becomes damaged, as small parts or broken pieces may present a hazard. CurioPrinta cannot account for every species, animal behavior, enclosure design, temperature, humidity level, or maintenance routine, so please confirm suitability for your own setup before use.
CurioPrinta does not describe this product as "reptile safe," "non-toxic," or guaranteed for any specific animal. Naming a species anywhere in this listing is for search relevance and design context, not a compatibility or safety claim.
π¦ What Is Not Included
You receive one 3D printed rock tower in the size and version you select, printed unpainted. Everything else shown in the product photos is not included, for example:
πΏ Plants, moss, and substrate
πͺ΅ Wood, background panels, and other hardscape props
π¦ Animals
π‘ Lighting, heating, and the terrarium or enclosure
Note: some photos may show the tower painted as a finishing example. The product ships unpainted.
β FAQ
π§ Can this be placed underwater?
This piece is not offered for fully submerged aquarium use. The PETG Wet Model is made for high-humidity, misted, bioactive, and paludarium setups, including land areas that see splashing or partial water contact.
π¨ Is the Wet Model painted?
No. The PETG Wet Model ships completely unpainted in a solid filament color. Any painted images are finishing examples only.
π§± Can I order this in PLA?
Yes, as the PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display. PLA is not recommended for submerged use, constantly wet or misted enclosures, strong UV lighting, or placement close to basking lamps.
βοΈ Can I use a platform as a basking spot?
The upper platforms are designed as resting and basking spots, but keep any heat lamp at a safe distance, never in direct contact, and monitor surface temperatures. For heated or UV-lit setups, the PETG Wet Model is the more durable choice, though continuous high-output UV can still gradually embrittle any plastic over time.
π§© Does the XL size need assembly?
No. Every size, including the XL, ships as a single printed piece.
ποΈ Can I paint it myself?
You can, but for anything in an animal habitat you must independently research and confirm that any paint or coating is suitable for your intended species and conditions. CurioPrinta ships the tower unpainted and does not recommend customer-applied paint for wet or submerged areas.
π§Ή How should I clean it?
Rinse the PETG Wet Model with clean water and use a soft brush if needed. Avoid soaps, bleach, solvents, abrasives, boiling water, and dishwashers. Dust the PLA Dry Model with a soft brush or a lightly damp cloth.
π· Will it look exactly like the photographs?
It will be very close, but small differences in texture, layer lines, and color are normal for made-to-order 3D prints, and appearance can shift under enclosure lighting or when wet.
π¦ Is it suitable for my specific reptile, amphibian, or invertebrate?
That depends on your animal and setup, so please compare the dimensions, caves, and ledges against your speciesβ adult size and follow qualified husbandry guidance. CurioPrinta cannot guarantee compatibility with any specific animal.
Designed by novYTerra