Hides

Desert Rock Plateau Terrarium Decor, 3D Printed Leopard Gecko Cave Hide, Bearded Dragon Climbing Rock with Stairs, Vivarium Decor





$22.99+

  • Details
    Picture a sun-baked sandstone outcrop rising out of the substrate: stacked plateaus catching the light, a rough staircase of ledges climbing up the side, and shadowed caves tucked in at the base. This desert rock plateau brings that weathered canyon look into a terrarium or vivarium while giving your animals real terrain to use, with low hideaways, multiple climbing levels, and flat spots to rest.
    πŸ“– Full Product Description
    This desert rock plateau is a 3D printed rock formation modeled on the eroded sandstone of arid landscapes. Designed by novYTerra, it builds upward in a series of small plateaus connected by an integrated staircase of natural-looking steps, with organic curves and a layered, structured surface that reads like real wind-worn stone rather than smooth molded plastic.
    It is a low, wide formation, so it sits as a freestanding centerpiece on the substrate or tucks into a corner as part of a larger desert or rock scape. Caves and passages around the base create shaded hiding spots and retreats, while the stepped plateaus above add climbing routes and resting levels. Bed it into sand or soil to make it look like it is rising out of the ground, and combine it with plants, branches, or other hardscape to build out the scene.
    The piece is offered in two versions so it fits the habitat you are building:
    PETG Wet Model for high-humidity, misted, bioactive, and high-UV setups.
    PLA Dry Model for arid terrariums under moderate lighting, dioramas, tabletop terrain, and display.
    The desert styling suits arid-habitat keepers working with leopard geckos, African fat-tailed geckos, and bearded dragons, along with dry-setup invertebrates such as desert tarantulas, scorpions, and darkling beetles. Because many desert enclosures run strong basking heat and high-output UVB, the PETG Wet Model is the better pick for brightly lit setups, while the PLA Dry Model fits drier builds with moderate lighting. The PETG Wet Model also opens it up to humid rock scapes for crested geckos and tropical isopods. Whatever you keep, compare the caves, passages, and step heights against the adult size and behavior of your specific animals before use.
    You receive one desert rock plateau in the size you select, printed as a single piece, unpainted, in a solid filament color. Every piece is printed to order, so the texture and layer character will be slightly unique to yours.
    βœ”οΈ Key Features
    βœ” Desert rock design by novYTerra, printed and sold by CurioPrinta under commercial license
    βœ” Multi-level sandstone plateaus with an integrated natural-stone staircase
    βœ” Caves and passages at the base for shaded hides and retreats
    βœ” Stepped levels that add climbing routes and resting spots
    βœ” Layered, weathered rock texture with organic curves for a realistic look
    βœ” PETG Wet Model for high-humidity, misted, bioactive, and high-UV setups, always shipped unpainted
    βœ” PLA Dry Model for arid terrariums under moderate lighting, dioramas, tabletop terrain, and display
    βœ” Four sizes, every size printed as a single solid piece
    βœ” Freestanding, low-profile formation that works as a centerpiece or corner piece
    βœ” Made to order
    🧱 Material Options
    This rock plateau is offered in two versions across all four sizes:
    PETG Wet Model
    Choose this version for high-humidity, misted, bioactive, or partially wet setups, and for enclosures under high-output UV lighting, which includes many desert builds. It is printed in PETG and supplied completely unpainted. CurioPrinta uses PETG for these setups rather than standard PLA because PETG holds up to prolonged moisture and UV exposure better than PLA. That is a material choice, not a guarantee: continuous high-output UV can still gradually embrittle PETG over time, and PETG is not permanently waterproof, indestructible, chemically inert, or universally suitable for every animal or habitat.
    PLA Dry Model
    Choose this version for arid terrariums with moderate lighting, dioramas, tabletop terrain, shelf display, and general home decor. PLA versions are not recommended for submerged use, constantly wet or heavily misted enclosures, or setups with strong UV lighting. Pick PLA only when the piece will stay dry and out of intense UV and heat.
    πŸ”§ Setup, Use & Care
    This piece is designed for terrarium, vivarium, and dry display use. It is not offered for aquarium use.
    For terrarium & vivarium use
    πŸ’§ Rinse with clean water before placing it in an enclosure, and inspect it before use.
    🌑️ Verify the material and design suit your habitat’s temperature, humidity, lighting, and species: PETG Wet Model for humid, misted, or high-UV setups, PLA Dry Model for dry setups with moderate lighting.
    πŸ”₯ Keep it away from direct contact with high-output heat lamps, heating elements, heat mats placed directly underneath, and other intense heat sources.
    🧱 Seat it firmly on or into the substrate so it cannot tip, shift, or collapse.
    🦎 Check caves, passages, and step heights against your animal’s adult size.
    🧹 Inspect regularly for wear, damage, trapped waste, or areas that are hard to clean, and remove it if it is damaged.
    πŸ“˜ Let qualified, species-specific husbandry guidance take priority over general product suggestions.
    Cleaning
    For the PETG Wet Model, rinse with clean water and use a soft brush when needed. Avoid soaps, bleach, solvents, abrasive cleaners, boiling water, dishwashers, and high-temperature cleaning, and let it dry completely before long-term storage. For the PLA Dry Model, dust with a soft brush or cloth, use a lightly damp cloth when appropriate, and keep it away from intense heat.
    πŸ“ Dimensions
    Approximate dimensions (Length Γ— Width Γ— Height), imperial first with metric in parentheses:
    S1 3.9" Γ— 4.1" Γ— 1.8" (100 Γ— 103 Γ— 45 mm)
    S2 4.9" Γ— 5.1" Γ— 2.2" (125 Γ— 129 Γ— 57 mm)
    S3 5.9" Γ— 6.1" Γ— 2.7" (150 Γ— 155 Γ— 68 mm)
    XL 7.1" Γ— 7.3" Γ— 3.2" (180 Γ— 186 Γ— 82 mm)
    Because each item is individually 3D printed, minor dimensional variation may occur.
    🎨 Color and Appearance
    The rock plateau is printed in a solid-color filament and is not painted. Natural-looking variation comes from choosing a filament color that reads as stone for your layout rather than from applied paint. Some listing photos may show the piece painted; those are finishing examples only, and yours ships unpainted.
    Colors may look slightly different in person because of lighting, photography, monitor settings, and filament batches, and the piece can look different under strong enclosure lighting. An exact color match is not promised.
    πŸ–¨οΈ About 3D Printing
    This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations are normal characteristics of the process. These details are not considered defects and make each piece slightly unique. Support-contact marks may appear in hidden or recessed areas such as cave interiors, and minor cosmetic differences can occur between prints because each piece is individually produced rather than injection molded.
    πŸ› οΈ Made to Order
    Each rock plateau is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time. Every size, including the XL, ships as a single piece with no assembly needed.
    ⚠️ Safety and Compatibility
    This product is decorative habitat decor, not a toy. You are responsible for deciding whether the size, material, openings, surfaces, and placement are appropriate for your specific animals and habitat. Animals should not be allowed to chew or ingest the material, and the item should be removed if it becomes damaged, as small parts or broken pieces may present a hazard. CurioPrinta cannot account for every species, animal behavior, enclosure design, temperature, humidity, lighting, or maintenance routine, so please confirm suitability for your own setup before use.
    CurioPrinta does not describe this product as "reptile safe," "non-toxic," or guaranteed for any specific animal. Naming a species anywhere in this listing is for search relevance and design context, not a compatibility or safety claim.
    πŸ“¦ What Is Not Included
    You receive one 3D printed desert rock plateau in the size and color you select, printed unpainted. Everything else shown in the product photos is not included, for example:
    🌡 Plants and substrate
    πŸͺ¨ Rocks, wood, and other hardscape props
    🦎 Animals
    πŸ’‘ Lighting, heating, and the terrarium or enclosure
    Note: some photos may show the rock painted as a finishing example. The product ships unpainted.
    ❓ FAQ
    πŸ’§ Can this be placed underwater?
    This piece is offered for terrarium, vivarium, and dry display use, not as aquarium decor. For humid, misted, or bioactive enclosures, choose the PETG Wet Model, which handles moisture better than standard PLA. The PLA Dry Model should stay dry.
    🎨 Is the Wet Model painted?
    No. The PETG Wet Model ships completely unpainted in a solid filament color, and so does the PLA Dry Model. Any painted images are finishing examples only.
    🧱 Can I order this in PLA?
    Yes, as the PLA Dry Model for arid terrariums with moderate lighting, dioramas, tabletop terrain, and dry display. PLA is not recommended for submerged use, constantly wet enclosures, or strong UV lighting.
    β˜€οΈ Which version should I pick for a desert setup with a UVB basking lamp?
    Choose the PETG Wet Model. PETG holds up to high-output UV better than PLA. It is not immune, since continuous UV can gradually embrittle any plastic over time, and either version should be kept out of direct contact with heat lamps and heating elements.
    πŸ“¦ Does the XL come in sections?
    No. Every size, including the XL, is printed and shipped as a single piece.
    πŸ–ŒοΈ Can I paint it myself?
    You can, but for anything in an animal habitat you must independently research and confirm that any paint or coating is suitable for your intended species and conditions. CurioPrinta ships the piece unpainted and does not recommend customer-applied paint for wet or submerged use.
    🧹 How should I clean it?
    Rinse the PETG Wet Model with clean water and use a soft brush if needed. Avoid soaps, bleach, solvents, abrasives, boiling water, and dishwashers. Dust the PLA Dry Model with a soft brush or a lightly damp cloth.
    πŸ“· Will it look exactly like the photographs?
    It will be very close, but small differences in texture, layer lines, and color are normal for made-to-order 3D prints, and appearance can shift under different enclosure lighting.
    🦎 Is it suitable for my specific reptile, amphibian, or invertebrate?
    That depends on your animal and setup, so please compare the dimensions, caves, passages, and step heights against your species and follow qualified husbandry guidance. CurioPrinta cannot guarantee compatibility with any specific animal.


    Designed by novYTerra
  • Shipping & Policies

    Shipping from United States

    Processing time

    5-9 business days

    Customs and import taxes

    Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.

    Payment Options

    Secure options
    • Accepts Etsy gift cards

    Returns & Exchanges

    Returns & exchanges not accepted

    But please contact me if you have problems with your order

    Privacy policy

    Privacy Policy for CurioPrinta

    At CurioPrinta, your privacy is very important to us. This Privacy Policy outlines how we collect, use, and protect your personal information when you visit our Etsy store and make purchases.

    Information We Collect
    When you make a purchase from our store, we collect the following information:

    Your Name: To personalize your experience and for order processing.
    Shipping Address: To deliver your purchased items.
    Email Address: To communicate with you about your order, including order confirmation, shipping updates, and customer support.
    Payment Information: Payment processing is handled securely through Etsy's payment system. We do not have access to your credit card or bank information.
    How We Use Your Information
    We use the information you provide for the following purposes:

    To process and fulfill your orders.
    To communicate with you regarding your order and provide customer support.
    To improve our products and services based on your feedback.
    To comply with legal obligations, such as tax and regulatory requirements.
    Sharing Your Information
    We respect your privacy and will not sell, trade, or share your personal information with third parties, except:

    Etsy: As an Etsy seller, we share information with Etsy as necessary to provide our services and comply with our obligations under Etsy's Seller Policy and Terms of Use.
    Shipping Providers: We share your shipping address with postal or courier services to deliver your order.
    Legal Requirements: If required by law, we may disclose your information to comply with legal processes, government requests, or enforce our policies.
    Data Retention
    We retain your personal information only for as long as necessary to fulfill your orders, provide customer support, and comply with legal requirements. Your information is securely stored and protected.

    Your Rights
    You have the right to access, correct, or delete your personal information. If you wish to exercise these rights or have any concerns about your data, please contact us through Etsy's messaging system.

    Cookies and Tracking Technologies
    Etsy uses cookies and similar tracking technologies to provide a better shopping experience. Please refer to Etsy's Privacy Policy for more information on how they use cookies and how you can manage your preferences.

    Changes to This Privacy Policy
    We may update this Privacy Policy from time to time. Any changes will be posted on this page, and the revised date will be indicated at the top of the policy.

    Contact Us
    If you have any questions or concerns about our Privacy Policy or how we handle your personal information, please contact us through Etsy's messaging system.