Rock Terrarium Background, Rustic Stone Backwall for Vivarium Aquarium, Naturalistic Reptile Frog Isopod Hide Decor

Layered stone ledges, weathered outcrops, and shadowed crevices give the back of your enclosure the look of a real rock face carved by time. This rustic backwall builds vertical depth and climbing terrain, turns a flat glass wall into a natural cliffside, and gives shy animals a network of ledges and pockets to explore. Whether you are aquascaping a planted tank or building a bioactive terrarium, it becomes the rugged backbone your layout grows around.

📖 Full Product Description
This is a 3D printed rock-face backwall designed to sit against the rear pane of a terrarium, vivarium, paludarium, or aquarium. The surface is sculpted with rustic, natural-looking stone: overlapping slabs, raised ledges, recessed shelves, and irregular fissures that read like real weathered rock rather than a smooth molded panel. Designed by novYTerra, it is meant to be the structural backdrop of an enclosure, adding height, texture, and multiple levels for planting and climbing.
The stepped ledges and shelves double as planting pockets and resting spots. In a bioactive or planted build you can tuck moss, ferns, epiphytes, and trailing plants along the levels so greenery grows into the stone over time. In an aquascape it gives fish and invertebrates vertical structure to weave through, along with shaded recesses that break up sightlines. Because the panel is offered in several sizes and can be combined side by side, you can cover a small back wall or scale up to span a large enclosure.
The naturalistic stone styling suits a wide range of keepers. For a misted or planted setup, the PETG Wet Model fits high-humidity residents such as dart frogs, tree frogs, crested geckos, and day geckos, along with humidity-loving invertebrates like tropical isopods and springtails. For a drier build, the PLA Dry Model suits arid-terrarium and display keepers who house animals such as many tarantulas, temperate isopods, and millipedes. Match the version to your habitat’s humidity, and always compare the ledges and openings against the size and behavior of your specific animals before use.
You receive the rock backwall panel in the size you select, printed unpainted in a single solid color. Plants, substrate, animals, lighting, and the enclosure itself are not included. Every piece is printed to order, so the exact texture and layer character will be slightly unique to your panel.
✔️ Key Features
✔ Original rustic rock-face design by novYTerra, printed and sold by CurioPrinta under commercial license
✔ Sculpted stone texture with layered ledges, shelves, and crevices for a real-cliff look
✔ Vertical structure and climbing terrain that turns a flat back pane into usable habitat
✔ Built-in planting pockets and resting shelves for moss, ferns, and epiphytes
✔ PETG Wet Model for high-humidity, misted, bioactive, submerged, or high-UV setups, always shipped unpainted
✔ PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display
✔ Offered in four sizes, and panels can be combined side by side to span larger enclosures
✔ Lightweight and easy to position against the rear glass
✔ Made to order in a range of filament colors
🧱 Material Options
This backwall is offered in two versions across all sizes, so you can match it to your enclosure:
PETG Wet Model
Choose this version for high-humidity, misted, bioactive, partially submerged, or aquarium setups, and for enclosures under high-output UV lighting. It is printed in PETG and supplied completely unpainted. CurioPrinta uses PETG for these setups rather than standard PLA because PETG stands up to prolonged moisture and UV exposure far better than PLA. That is a material choice, not a guarantee: continuous high-output UV can still gradually embrittle PETG over time, and PETG is not permanently waterproof, indestructible, chemically inert, or universally suitable for every animal or water condition.
PLA Dry Model
Choose this version for arid terrariums, dioramas, tabletop terrain, shelf display, and general home decor. PLA versions are not recommended for submerged aquarium use, constantly wet or heavily misted enclosures, or setups with strong UV lighting. Pick PLA only when the panel will stay dry and out of intense UV.
🔧 Setup, Use & Care
For submerged and aquarium use (PETG Wet Model)
💧 Rinse the panel thoroughly with clean water before placing it in an aquarium.
🚫 Avoid soaps, detergents, household cleaners, and unapproved chemical treatments.
🔍 Inspect the item before use and confirm openings and ledges are appropriately sized for the animals in the tank.
🧱 Position it securely so it cannot shift, tip, trap an animal, or press hard against the glass.
🔁 Check it periodically as part of normal aquarium maintenance, and remove it if it becomes damaged, develops sharp areas, or no longer fits securely.
🐟 Introduce any new decoration thoughtfully and observe your animals after installation.
For terrarium, vivarium & paludarium use
🌡️ Verify the material and design suit your habitat’s temperature, humidity, lighting, and species.
🔥 Keep it away from direct contact with high-output heat lamps, heating elements, and other intense heat sources.
🧱 Position the panel securely against the back so it cannot tip or collapse.
🦎 Check ledges, pockets, and openings against your animal’s adult size.
🧹 Inspect regularly for wear, damage, trapped waste, or areas that are hard to clean.
📘 Let qualified, species-specific husbandry guidance take priority over general product suggestions.
Cleaning
For the submerged PETG Wet Model, rinse with clean water and use a soft brush when needed. Avoid soaps, bleach, solvents, abrasive cleaners, boiling water, dishwashers, and high-temperature cleaning. Allow it to dry completely if it is removed for long-term storage. For the dry PLA model, dust with a soft brush or cloth, use a lightly damp cloth when appropriate, and keep it away from intense heat.
📐 Dimensions
Approximate dimensions (Length × Width × Height), imperial first with metric in parentheses:
Small (S1) 5.7" × 2.9" × 2.9" (145 × 73 × 73 mm)
Medium (S2) 5.7" × 8.4" × 3.9" (145 × 213 × 99 mm)
Large (S3) 7.5" × 7.5" × 3.7" (190 × 190 × 95 mm)

Because each item is individually 3D printed, minor dimensional variation may occur.
🎨 Color and Appearance
The panel is printed in a solid-color filament and is not painted. A range of filament colors is available so you can choose a tone that reads as natural stone for your layout. Some listing photos show the backwall painted; those are finishing examples only, and your panel ships unpainted.
Colors may look slightly different in person because of lighting, photography, monitor settings, and filament batches. The panel’s appearance can also shift when submerged or viewed under aquarium lighting. Natural-looking variation comes from selecting an appropriate filament color rather than from applied paint, and an exact color match is not promised.
🖨️ About 3D Printing
This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations are normal characteristics of the process. These details are not considered defects and make each piece slightly unique. Support-contact marks may appear in hidden or recessed areas, and minor cosmetic differences can occur between prints because each panel is individually produced rather than injection molded.
🛠️ Made to Order
Each panel is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time.
🧩 The XL size is large enough that it prints across multiple sections. It ships unassembled as separate printed pieces that fit together to form the full panel, so you can position and secure them in your enclosure yourself. The smaller sizes ship as a single piece.
⚠️ Safety and Compatibility
This product is decorative habitat decor, not a toy. You are responsible for deciding whether the size, material, openings, surfaces, and placement are appropriate for your specific animals and habitat. Animals should not be allowed to chew or ingest the material, and the item should be removed if it becomes damaged, as small parts or broken pieces may present a hazard. CurioPrinta cannot account for every species, animal behavior, enclosure design, water chemistry, temperature, or maintenance routine, so please confirm suitability for your own setup before use.
CurioPrinta does not describe this product as "aquarium safe," "reptile safe," "non-toxic," or guaranteed for any specific animal. Naming a species anywhere in this listing is for search relevance and design context, not a compatibility or safety claim.
📦 What Is Not Included
You receive one 3D printed rock backwall panel in the size and color you select, printed unpainted. Everything else shown in the product photos is not included, for example:
🌿 Plants, moss, and substrate
🪨 Rocks, wood, and other hardscape props
🐢 Animals
💡 Lighting, and the aquarium or terrarium enclosure
Note: some photos show the backwall painted as a finishing example. The product ships unpainted.
❓ FAQ
💧 Can this be placed underwater?
Yes, when you choose the PETG Wet Model. PETG is the material CurioPrinta uses for submerged and high-humidity decor because it handles prolonged water exposure better than standard PLA. Rinse it first, position it securely, and check it as part of normal maintenance.
🎨 Is the aquarium version painted?
No. The PETG Wet Model ships completely unpainted in a solid filament color. Any painted images are finishing examples only.
🧱 Can I order this in PLA?
Yes, as the PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display. PLA is not recommended for submerged aquarium use, constantly wet enclosures, or strong UV lighting.
☀️ Which version should I pick for a UV-lit setup?
Choose the PETG Wet Model. PETG holds up to high-output UV far better than PLA. It is not immune, since continuous UV can gradually embrittle any plastic over time, but it is the more durable choice for brightly lit enclosures.
🧩 Does the XL size come assembled?
No. The XL prints in multiple sections and ships unassembled as separate pieces that fit together into the full panel. You arrange and secure them in your enclosure. The smaller sizes ship as a single piece.
🖌️ Can I paint it myself?
You can, but for anything in an animal habitat you must independently research and confirm that any paint or coating is suitable for your intended species and conditions. CurioPrinta does not recommend customer-applied paint for submerged use and ships the panel unpainted.
🧹 How should I clean it?
Rinse the PETG Wet Model with clean water and use a soft brush if needed. Avoid soaps, bleach, solvents, abrasives, boiling water, and dishwashers. Dust the PLA Dry Model with a soft brush or a lightly damp cloth.
📷 Will it look exactly like the photographs?
It will be very close, but small differences in texture, layer lines, and color are normal for made-to-order 3D prints, and appearance can shift under aquarium lighting or when submerged.
🐟 Is it suitable for my specific fish, reptile, amphibian, snail, or shrimp?
That depends on your animal and setup, so please compare the dimensions, ledges, and openings against your species and follow qualified husbandry guidance. CurioPrinta cannot guarantee compatibility with any specific animal.

Designed by novYTerra