Details
Tilted stone slabs stacked one over another, like a cliff face that has been slowly pushed up and weathered for ages. Sloping Rocks turns the back of your enclosure into a layered rock wall full of narrow shelves, shaded cracks, and little plateaus for climbing, basking, and hiding. Tuck moss and plants into the gaps and it reads like a slice of real hillside behind the glass.
π Full Product Description
Sloping Rocks is a 3D printed backwall built from densely packed, slightly angled stone slabs. Instead of one flat sculpted surface, the panel is made of overlapping layers that step out from the back, so you get real depth and a strong diagonal rhythm that looks natural from every angle. Designed by novYTerra, it is meant to stand against the rear pane of a terrarium, vivarium, or paludarium and act as the rocky backbone of the layout.
Where the slabs overlap they form small niches, crevices, and flat plateaus. Those spots work as climbing routes, resting ledges, and tight retreats, and in a planted or bioactive build they hold a little substrate and moss so greenery can creep across the stone over time. The compact depth keeps it from eating up floor space, which makes it a good fit when you want a lot of structure in a smaller enclosure. The taller and wider sizes give you more room to build height in bigger setups.
Pick the version that matches your humidity. The PETG Wet Model suits misted, bioactive, and paludarium setups for animals such as dart frogs, tree frogs, crested geckos, and day geckos, along with invertebrates like jumping spiders and tropical isopods. The PLA Dry Model suits arid terrariums and display builds for animals such as leopard geckos, many tarantulas, and scorpions. Always compare the ledges, gaps, and openings against the size and behavior of your specific animals before use.
You receive one Sloping Rocks backwall panel in the size, material, and color you select, printed as a single piece and shipped unpainted. Plants, substrate, animals, lighting, and the enclosure are not included.
βοΈ Key Features
β Original novYTerra rock-face design, printed and sold by CurioPrinta under commercial license
β Overlapping, slanted stone slabs that create real layered depth
β Natural niches, crevices, and plateaus for climbing, resting, and hiding
β Ledges that can hold moss and substrate for planted and bioactive builds
β Compact depth that adds lots of structure without crowding the floor
β PETG Wet Model for high-humidity, misted, bioactive, paludarium, or high-UV setups, always shipped unpainted
β PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display
β Four sizes, every size printed as a single piece
β Made to order in a range of filament colors, plus color-changing PLA options
π§± Material Options
Sloping Rocks is offered in two versions across all four sizes:
PETG Wet Model
Choose this version for high-humidity, misted, bioactive, and paludarium setups, including spots near or in a paludariumβs water section, and for enclosures under high-output UV lighting. It is printed in PETG and supplied completely unpainted. CurioPrinta uses PETG for these setups rather than standard PLA because PETG handles prolonged moisture and UV better than PLA. That is a material choice, not a guarantee: continuous high-output UV can still gradually embrittle PETG over time, and PETG is not permanently waterproof, indestructible, chemically inert, or universally suitable for every animal or habitat.
PLA Dry Model
Choose this version for arid terrariums, dioramas, tabletop terrain, shelf display, and general home decor. PLA is not recommended for submerged use, constantly wet or heavily misted enclosures, or setups with strong UV lighting. Pick PLA only when the panel will stay dry and out of intense UV. The color-changing filament options are available in PLA only.
π§ Setup, Use & Care
For terrarium, vivarium & paludarium use
π§ Rinse the panel with clean water before installing it.
π‘οΈ Match the version to your habitat: PETG Wet Model for humid, misted, bioactive, or paludarium builds; PLA Dry Model for dry setups only.
π₯ Keep it away from direct contact with high-output heat lamps, heating elements, and other intense heat sources.
π§± Stand the panel securely against the back glass so it cannot shift, tip, or trap an animal.
π¦ Check ledges, gaps, and crevices against your animalβs adult size.
π Inspect regularly for wear, damage, trapped waste, or areas that are hard to clean, and remove it if it becomes damaged.
π Let qualified, species-specific husbandry guidance take priority over general product suggestions.
Cleaning
For the PETG Wet Model, rinse with clean water and use a soft brush when needed. Avoid soaps, bleach, solvents, abrasive cleaners, boiling water, dishwashers, and high-temperature cleaning, and let it dry completely before long-term storage. For the PLA Dry Model, dust with a soft brush or cloth, use a lightly damp cloth when appropriate, and keep it away from intense heat.
π Dimensions
Approximate dimensions (Width Γ Depth Γ Height), imperial first with metric in parentheses:
Small (S1) 3.7" Γ 2.0" Γ 5.5" (95 Γ 52 Γ 140 mm)
Medium (S2) 5.7" Γ 2.0" Γ 5.7" (145 Γ 52 Γ 145 mm)
Large (S3) 7.5" Γ 2.0" Γ 7.5" (190 Γ 52 Γ 190 mm)
XL 5.7" Γ 2.0" Γ 8.4" (145 Γ 52 Γ 213 mm)
The XL is the tallest size, with a narrower footprint than the Large, so it suits taller vertical enclosures.
Because each item is individually 3D printed, minor dimensional variation may occur.
π¨ Color and Appearance
The panel is printed in solid filament and is not painted. Any available color can be selected, and PLA - Rock, Fossil, and Sandstone are great picks for a natural stone look. For something bolder, color-changing PLA options such as Black/Red and Blue/Red are also available (PLA Dry Model only). The full color list is shown in the listing images.
Colors may look slightly different in person because of lighting, photography, monitor settings, and filament batches, and appearance can shift under enclosure lighting or when wet. Color-changing filaments shift tone across the print, so the blend on your panel will be its own. An exact color match is not promised. Some listing photos show the backwall painted; those are finishing examples only.
π¨οΈ About 3D Printing
This item is created using FDM 3D printing technology. Fine layer lines, small seams, slight texture changes, and minor variations are normal characteristics of the process. These details are not considered defects and make each piece slightly unique. Support-contact marks may appear in hidden or recessed areas between the slabs, and minor cosmetic differences can occur between prints because each panel is individually produced rather than injection molded.
π οΈ Made to Order
Each panel is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time. Every size, including the XL, ships as a single piece with no assembly needed.
β οΈ Safety and Compatibility
This product is decorative habitat decor, not a toy. You are responsible for deciding whether the size, material, openings, surfaces, and placement are appropriate for your specific animals and habitat. Animals should not be allowed to chew or ingest the material, and the item should be removed if it becomes damaged, as small parts or broken pieces may present a hazard. CurioPrinta cannot account for every species, animal behavior, enclosure design, water chemistry, temperature, or maintenance routine, so please confirm suitability for your own setup before use.
Naming a species anywhere in this listing is for search relevance and design context, not a compatibility or safety claim.
π¦ What Is Not Included
You receive one 3D printed Sloping Rocks backwall in the size, material, and color you select, shipped unpainted. Everything else shown in the product photos is not included, for example:
πΏ Plants, moss, and substrate
πͺ΅ Wood, extra rocks, and other hardscape props
πΈ Animals
π‘ Lighting, and the terrarium or enclosure
Note: some photos show the backwall painted as a finishing example. The product ships unpainted.
β FAQ
π§ Can this be placed underwater?
Sloping Rocks is designed for terrariums, vivariums, and paludariums rather than as aquarium decor. In a paludarium, choose the PETG Wet Model for any area near or in the water section. The PLA Dry Model should never be placed in water.
π¨ Is the Wet Model painted?
No. The PETG Wet Model ships completely unpainted in a solid filament color. Any painted images are finishing examples only.
π§± Can I order this in PLA?
Yes, as the PLA Dry Model for arid terrariums, dioramas, tabletop terrain, and dry display. PLA is not recommended for wet or heavily misted enclosures or strong UV lighting.
π Are the color-changing options available in PETG?
No. Color-changing filaments such as Black/Red and Blue/Red are offered in the PLA Dry Model only.
βοΈ Which version should I pick for a UV-lit setup?
Choose the PETG Wet Model. PETG holds up to high-output UV better than PLA. It is not immune, since continuous UV can gradually embrittle plastic over time, but it is the more durable choice for brightly lit enclosures.
π Does any size come in sections?
No. All four sizes, including the XL, are printed and shipped as a single piece.
ποΈ Can I paint it myself?
You can, but for anything in an animal habitat you must independently research and confirm that any paint or coating is suitable for your species and conditions. CurioPrinta does not recommend customer-applied paint for wet or submerged areas and ships the panel unpainted.
π§Ή How should I clean it?
Rinse the PETG Wet Model with clean water and use a soft brush if needed. Avoid soaps, bleach, solvents, abrasives, boiling water, and dishwashers. Dust the PLA Dry Model with a soft brush or a lightly damp cloth.
π· Will it look exactly like the photographs?
Very close, but small differences in texture, layer lines, and color are normal for made-to-order prints, and appearance can shift under enclosure lighting.
π¦ Is it suitable for my specific reptile, amphibian, or invertebrate?
That depends on your animal and setup, so please compare the dimensions, ledges, and gaps against your species and follow qualified husbandry guidance. CurioPrinta cannot guarantee compatibility with any specific animal.
Designed by novYTerra