Details
A gnarled, wind-bent tree with a twisting trunk and a crown of bare, forked branches. Terrarium Tree A stands on its own spread of roots and gives small climbers a natural place to perch, hunt and explore. Drop it into a planted vivarium or a dry display and it reads like a real weathered tree in miniature.
π Full Product Description
Terrarium Tree A is a 3D printed tree designed by novYTerra. The trunk twists up from a flared root base, carved with bark texture that looks like old, weathered wood, then splits into a wide crown of branches that fork again into fine twigs. One short side limb juts out partway up the trunk.
The root base lets it stand freestanding on the substrate, or you can bed the roots into soil or moss for a grounded look. The open branches give small, light animals vertical climbing routes, perches and lookout spots, and they make an easy frame for tucking in moss or small air plants. It also works as a centerpiece in a diorama or on a tabletop game board.
For humid, misted or bioactive builds, the PETG Wet Model suits keepers of jumping spiders, mantises and dart frogs. For dry setups and display, the PLA Dry Model suits scorpion enclosures, dioramas and tabletop terrain. The fine twig tips are delicate, so the branches are best as perches for small, light animals. Always compare the branch thickness, height and overall size against your own animals before use.
You receive one Terrarium Tree A in the size and material you select, printed unpainted in a single solid color and shipped in one piece. Plants, moss, substrate, animals, lighting and the enclosure are not included.
βοΈ Key Features
β Original novYTerra design, printed and sold by CurioPrinta under commercial license
β Twisted trunk with bark texture and a wide crown of forked branches
β Flared root base so it stands freestanding
β Climbing routes and perches for small, light climbers
β Fine twig tips are delicate and best for lightweight animals
β PETG Wet Model for humid, misted, bioactive and paludarium setups
β PLA Dry Model for arid terrariums, dioramas, tabletop terrain and display
β Four sizes, from about 5.1 to 8.9 inches tall
β Available in every filament color offered in the shop
β Ships in one piece, made to order
π§± Material Options
PETG Wet Model
Choose PETG for misted, high-humidity, bioactive and paludarium setups, and for enclosures with strong UV lighting. PETG handles prolonged moisture and UV better than standard PLA, but it is not a guarantee: continuous high-output UV can still make it brittle over time, and it is not permanently waterproof, indestructible or chemically inert. PETG Wet Models ship unpainted.
PLA Dry Model
Choose PLA for arid terrariums, dioramas, tabletop terrain and display. PLA is for dry use only and should not sit in constantly wet enclosures or under strong UV. PLA versions are not recommended for submerged aquarium use.
π§ Setup, Use & Care
Terrarium, Vivarium & Paludarium Use
π Confirm the material and design suit your habitatβs temperature, humidity, lighting and species.
π₯ Keep it away from heat lamps, heat mats and other heating elements.
βοΈ Set it on a firm, level spot or bed the roots into substrate so it cannot tip.
πΏ The twig tips are thin. Handle the branches gently and avoid hanging heavy items from them.
π Check branch thickness and height against your animalβs adult size and weight.
π§ For any part that will sit in water or stay constantly wet, use the PETG Wet Model only.
π Inspect it regularly for broken twigs, sharp edges and trapped waste.
π Species-specific husbandry guidance always comes first.
Cleaning
πͺ₯ PETG: rinse with clean water and a soft brush. No soap, bleach, solvents, abrasives, boiling water or dishwasher. Dry fully before storage.
π§½ PLA: wipe with a soft brush or a lightly damp cloth, and keep it away from heat.
π Dimensions
Length Γ Width Γ Height
S1 2.8 Γ 4.6 Γ 5.1 in (72 Γ 116 Γ 129 mm)
S2 3.5 Γ 5.7 Γ 6.3 in (90 Γ 146 Γ 161 mm)
S3 4.3 Γ 6.9 Γ 7.6 in (108 Γ 174 Γ 194 mm)
XL 5.0 Γ 8.0 Γ 8.9 in (126 Γ 203 Γ 226 mm)
Because each item is individually 3D printed, minor dimensional variation may occur.
π¨ Color and Appearance
Terrarium Tree A is available in every filament color offered in the shop. It is printed in a solid filament color and is not painted. Painted photos show finishing examples only. Color can look different depending on lighting, photography, your screen and the filament batch, and it can shift under enclosure lighting, so an exact match to the photos is not promised.
π¨οΈ About 3D Printing
This piece is made on an FDM 3D printer, layer by layer. Fine layer lines, small seams, slight texture changes and support-contact marks under the branches are a normal part of the process and are not defects. Each piece is produced individually, not injection molded.
π οΈ Made to Order
Every Terrarium Tree A is printed individually after you order, so minor differences between pieces are normal. Production time is separate from shipping time. All sizes ship in one piece.
β οΈ Safety and Compatibility
Terrarium Tree A is decorative habitat decor, not a toy. You know your animals best, so you decide whether the size, material, branch thickness, surfaces and placement suit them. The fine twig tips can snap under weight or rough handling, so it is best for small, light animals. Do not let animals chew or eat it, and remove it if it becomes damaged, since broken pieces can be a hazard. CurioPrinta cannot account for every species, behavior, enclosure, temperature or care routine.
Species names in this listing are for search and design context only and are not a compatibility claim.
π¦ What Is Not Included
You receive one Terrarium Tree A in your chosen size and material.
π± Plants, moss and substrate
πͺ¨ Rocks and other props shown in photos
π Animals
π‘ Lighting and the enclosure
π¨ It ships unpainted, in a single solid filament color
β FAQ
π§ Can this be placed underwater?
Terrarium Tree A is listed for terrariums, vivariums and paludariums, not aquariums. In a paludarium, use the PETG Wet Model for any part that sits in or near water. Never use the PLA Dry Model in water.
π¨ Is the wet version painted?
No. The PETG Wet Model ships unpainted, in a single solid filament color.
π§΅ Can I order this in PLA?
Yes. The PLA Dry Model is available in every size, for dry setups and display only.
ποΈ Can I paint it myself?
You can paint a PLA Dry Model for display or tabletop terrain. For any piece going into a habitat, especially a wet one, research any paint or coating carefully yourself before using it with animals.
π§½ How should I clean it?
PETG: clean water and a soft brush, no soap or chemicals. PLA: a soft brush or lightly damp cloth, kept away from heat. Go gently around the twig tips.
πΏ How sturdy are the branches?
The trunk and main limbs are solid, but the fine twig tips are thin and can snap under weight or rough handling. The branches are best for small, light animals. Larger sizes have thicker branches.
βοΈ Can it go under UV lighting?
Choose the PETG Wet Model for enclosures with strong UV. PETG holds up better than PLA under UV, though long exposure to high-output UV can still make it brittle over time. Keep either version away from heat lamps.
π· Will it look exactly like the photographs?
Close, but not exactly. Painted photos show finishing examples, and every print has its own small layer and texture differences.
πΈ Is it suitable for my specific amphibian, reptile or invertebrate?
That depends on your animal and setup. Check the branch thickness, height and dimensions against your animalβs adult size and weight. CurioPrinta cannot guarantee it suits a specific animal.
Designed by novYTerra